A 2-DOF manipulator for micro-assembly in a minifactory

December 2016

A 2-DOF manipulator for micro-assembly in a minifactory

Authors:

Jun Zhang and Ralph Hollis

Abstract:

This paper presents a new 2-DOF “SMACbot” manipulator which can cooperate with a 2-DOF planar “courier” robot to perform precise assembly tasks within a minifactory. The SMACbot manipulator augments the function of an off-the-shelf rotary/linear actuator from SMAC Corporation. The mechanical and electrical systems of SMACbot are described, and the sensing and control of the manipulator are introduced. Novel features include a vacuum system for compensating the vertical axis weight of the SMACbot and an air bearing system for minimizing friction. The SMACbot utilizes a remote user interface based on web sockets. Basic motion control performance of the SMACbot was measured with a laser interferometer to provide ground truth. The vertical (z-direction) 5 mm fixed distance motion repeatability test results showed the average error is 8.4 μm. The 10 μm small distance motion error is approximately 0.3 μm. The 0.5° fixed angle rotation motion repeatability error is approximately 0.12° which is mainly caused by the backlash of the reduction gearing of the SMAC rotational (θ) axis.
@conference{Zhang-2016-122028,
author = {Jun Zhang And Ralph Hollis},
title = {A 2-DOF manipulator for micro-assembly in a minifactory},
booktitle = {Proceedings of IEEE International Conference on Robotics and Biomimetics (ROBIO '16)},
year = {2016},
month = {December},
pages = {1582 - 1587},
}
Copyright notice: This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. These works may not be reposted without the explicit permission of the copyright holder.