A New Approach to Control Single-Link Flexible Arms

March 1989

A New Approach to Control Single-Link Flexible Arms

Authors:

V. Feliu, K. S. Rattan, and H. Benjamin Brown
Technical Report
CMU-RI-TR-89-08

Abstract:

This report presents a new way to model and identify single-link flexible arms when Coulomb friction is present in the joint. In order to isolate the effects of this nonlinearity, the arm model is divided into two submodels: motor and beam. The two are coupled through the torque at the base of the beam. A systematic methd is developed to obtain the dynamics of a lumped-mass flexible beam, and some properties are obtained from this model. The influence of the payload on the model is given special attention. This way of modelling is later extended to the general case of distributed-mass flexible arms. Identification in the presence of Coulomb friction is carried out. A new method is proposed to estimate this friction and to estimate the motor frequency response from experimental results, which are highly distorted by this nonlinear friction. Experimental results are presented and, finally, conclusions are drawn.
@techreport{Feliu-1989-15456,
author = {V. Feliu And K. S. Rattan And H. Benjamin Brown},
title = {A New Approach to Control Single-Link Flexible Arms},
year = {1989},
month = {March},
institute = {Carnegie Mellon University},
address = {Pittsburgh, PA},
number = {CMU-RI-TR-89-08},
}
Copyright notice: This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. These works may not be reposted without the explicit permission of the copyright holder.